Product Information
Product Name:    SPA112Serial Number:    *
Software Version:    1.3.5(004)Hardware Version:    1.0.0
MAC Address:    *Client Certificate:    Installed
Customization:    Open

System Status
Current Time:    8/19/2015 14:18:34Elapsed Time:    1 day and 03:43:56
RTP Packets Sent:    235416RTP Bytes Sent:    37665000
RTP Packets Recv:    227295RTP Bytes Recv:    36367200
SIP Messages Sent:    1479SIP Bytes Sent:    1048641
SIP Messages Recv:    1463SIP Bytes Recv:    777341
External IP:    

Line 1 Status
Hook State:    OnRegistration State:    Registered
Last Registration At:    8/19/2015 14:18:03Next Registration In:    266 s
Message Waiting:    NoMapped SIP Port:    
Call Back Active:    No
Last Called Number:    *Last Caller Number:    *
Call 1 State:    IdleCall 2 State:    Idle
Call 1 Tone:    NoneCall 2 Tone:    None
Call 1 Encoder:    Call 2 Encoder:    
Call 1 Decoder:    Call 2 Decoder:    
Call 1 FAX:    Call 2 FAX:    
Call 1 Type:    Call 2 Type:    
Call 1 Remote Hold:    Call 2 Remote Hold:    
Call 1 Callback:    Call 2 Callback:    
Call 1 Peer Name:    Call 2 Peer Name:    
Call 1 Peer Phone:    Call 2 Peer Phone:    
Call 1 Duration:    Call 2 Duration:    
Call 1 Packets Sent:    Call 2 Packets Sent:    
Call 1 Packets Recv:    Call 2 Packets Recv:    
Call 1 Bytes Sent:    Call 2 Bytes Sent:    
Call 1 Bytes Recv:    Call 2 Bytes Recv:    
Call 1 Decode Latency:    Call 2 Decode Latency:    
Call 1 Jitter:    Call 2 Jitter:    
Call 1 Round Trip Delay:    Call 2 Round Trip Delay:    
Call 1 Packets Lost:    Call 2 Packets Lost:    
Call 1 Packet Error:    Call 2 Packet Error:    

Line 2 Status
Hook State:    OnRegistration State:    Registered
Last Registration At:    8/19/2015 14:16:08Next Registration In:    150 s
Message Waiting:    NoMapped SIP Port:    
Call Back Active:    No
Last Called Number:    *Last Caller Number:    *
Call 1 State:    IdleCall 2 State:    Idle
Call 1 Tone:    NoneCall 2 Tone:    None
Call 1 Encoder:    Call 2 Encoder:    
Call 1 Decoder:    Call 2 Decoder:    
Call 1 FAX:    Call 2 FAX:    
Call 1 Type:    Call 2 Type:    
Call 1 Remote Hold:    Call 2 Remote Hold:    
Call 1 Callback:    Call 2 Callback:    
Call 1 Peer Name:    Call 2 Peer Name:    
Call 1 Peer Phone:    Call 2 Peer Phone:    
Call 1 Duration:    Call 2 Duration:    
Call 1 Packets Sent:    Call 2 Packets Sent:    
Call 1 Packets Recv:    Call 2 Packets Recv:    
Call 1 Bytes Sent:    Call 2 Bytes Sent:    
Call 1 Bytes Recv:    Call 2 Bytes Recv:    
Call 1 Decode Latency:    Call 2 Decode Latency:    
Call 1 Jitter:    Call 2 Jitter:    
Call 1 Round Trip Delay:    Call 2 Round Trip Delay:    
Call 1 Packets Lost:    Call 2 Packets Lost:    
Call 1 Packet Error:    Call 2 Packet Error:    

Custom CA Status
Custom CA Provisioning Status:    
Custom CA Info:    Not Installed

System Configuration
Restricted Access Domains:    
IVR Admin Passwd:    Network Startup Delay:    

Miscellaneous Settings
DNS Query TTL Ignore:     Syslog Server:    
Syslog Server Transport:    Debug Server:    
Debug Server Transport:    Debug Level:    
Syslog Prefix:    

SIP Parameters
Max Forward:    Max Redirection:    
Max Auth:    SIP User Agent Name:    
SIP Server Name:    SIP Reg User Agent Name:    
SIP Reg Starting Sequence Number:    SIP Accept Language:    
DTMF Relay MIME Type:    Hook Flash MIME Type:    
Remove Last Reg:     Use Compact Header:    
Escape Display Name:     RFC 2543 Call Hold:    
Mark All AVT Packets:     AVT Packet Size:    
SIP TCP Port Min:    SIP TCP Port Max:    
CTI Enable:     Keep Referee When REFER Failed:    
Caller ID Header:    

SIP Timer Values (sec)
SIP T1:    SIP T2:    
SIP T4:    SIP Timer B:    
SIP Timer F:    SIP Timer H:    
SIP Timer D:    SIP Timer J:    
INVITE Expires:    ReINVITE Expires:    
Reg Min Expires:    Reg Max Expires:    
Reg Retry Intvl:    Reg Retry Long Intvl:    
Reg Retry Random Delay:    Reg Retry Long Random Delay:    
Reg Retry Intvl Cap:    

Response Status Code Handling
SIT1 RSC:    SIT2 RSC:    
SIT3 RSC:    SIT4 RSC:    
Try Backup RSC:    Retry Reg RSC:    

RTP Parameters
RTP Port Min:    RTP Port Max:    
RTP Packet Size:    RTP Tx Packet Size Follows Remote SDP:    
Max RTP ICMP Err:    RTCP Tx Interval:    
No UDP Checksum:     Stats In BYE:    

SDP Payload Types
NSE Dynamic Payload:    AVT Dynamic Payload:    
INFOREQ Dynamic Payload:    G726r32 Dynamic Payload:    
G729b Dynamic Payload:    EncapRTP Dynamic Payload:    
RTP-Start-Loopback Dynamic Payload:    RTP-Start-Loopback Codec:    
NSE Codec Name:    AVT Codec Name:    
G711u Codec Name:    G711a Codec Name:    
G726r32 Codec Name:    G729a Codec Name:    
G729b Codec Name:    EncapRTP Codec Name:    

NAT Support Parameters
Handle VIA received:     Handle VIA rport:    
Insert VIA received:     Insert VIA rport:    
Substitute VIA Addr:     Send Resp To Src Port:    
STUN Enable:     STUN Test Enable:    
STUN Server:    EXT IP:    
EXT RTP Port Min:    NAT Keep Alive Intvl:    
Redirect Keep Alive:    

Linksys Key System Parameters
Linksys Key System:     Multicast Address:    
Key System Auto Discovery:     Key System IP Address:    
Force LAN Codec:    Station Name:    

Configuration Profile
Provision Enable:     Resync On Reset:    
Resync Random Delay:    Resync At (HHmm):    
Resync At Random Delay:    Resync Periodic:    
Resync Error Retry Delay:    Forced Resync Delay:    
Resync From SIP:     Resync After Upgrade Attempt:    
Resync Trigger 1:    
Resync Trigger 2:    
Resync Fails On FNF:    
Profile Rule:    
Profile Rule B:    
Profile Rule C:    
Profile Rule D:    
DHCP Option To Use:    Transport Protocol:    
Log Resync Request Msg:    
Log Resync Success Msg:    
Log Resync Failure Msg:    
Report Rule:    

Firmware Upgrade
Upgrade Enable:    
Upgrade Error Retry Delay:    Downgrade Rev Limit:    
Upgrade Rule:    
Log Upgrade Request Msg:    
Log Upgrade Success Msg:    
Log Upgrade Failure Msg:    
License Keys:    

CA Settings
Custom CA URL:    

General Purpose Parameters
GPP A:    
GPP B:    
GPP C:    
GPP D:    
GPP E:    
GPP F:    
GPP G:    
GPP H:    
GPP I:    
GPP J:    
GPP K:    
GPP L:    
GPP M:    
GPP N:    
GPP O:    
GPP P:    

Call Progress Tones
Dial Tone:    
Second Dial Tone:    
Outside Dial Tone:    
Prompt Tone:    
Busy Tone:    
Reorder Tone:    
Off Hook Warning Tone:    
Ring Back Tone:    
Ring Back 2 Tone:    
Confirm Tone:    
SIT1 Tone:    
SIT2 Tone:    
SIT3 Tone:    
SIT4 Tone:    
MWI Dial Tone:    
Cfwd Dial Tone:    
Holding Tone:    
Conference Tone:    
Secure Call Indication Tone:    
Feature Invocation Tone:    
Call Remind Tone:    

Distinctive Ring Patterns
Ring1 Cadence:    Ring2 Cadence:    
Ring3 Cadence:    Ring4 Cadence:    
Ring5 Cadence:    Ring6 Cadence:    
Ring7 Cadence:    Ring8 Cadence:    

Distinctive Call Waiting Tone Patterns
CWT1 Cadence:    CWT2 Cadence:    
CWT3 Cadence:    CWT4 Cadence:    
CWT5 Cadence:    CWT6 Cadence:    
CWT7 Cadence:    CWT8 Cadence:    

Distinctive Ring/CWT Pattern Names
Ring1 Name:    Ring2 Name:    
Ring3 Name:    Ring4 Name:    
Ring5 Name:    Ring6 Name:    
Ring7 Name:    Ring8 Name:    

Ring and Call Waiting Tone Spec
Ring Waveform:    Ring Frequency:    
Ring Voltage:    CWT Frequency:    
Synchronized Ring:    

Control Timer Values (sec)
Hook Flash Timer Min:    Hook Flash Timer Max:    
Callee On Hook Delay:    Reorder Delay:    
Call Back Expires:    Call Back Retry Intvl:    
Call Back Delay:    VMWI Refresh Intvl:    
Interdigit Long Timer:    Interdigit Short Timer:    
CPC Delay:    CPC Duration:    

Vertical Service Activation Codes
Call Return Code:    Call Redial Code:    
Blind Transfer Code:    Call Back Act Code:    
Call Back Deact Code:    Call Back Busy Act Code:    
Cfwd All Act Code:    Cfwd All Deact Code:    
Cfwd Busy Act Code:    Cfwd Busy Deact Code:    
Cfwd No Ans Act Code:    Cfwd No Ans Deact Code:    
Cfwd Last Act Code:    Cfwd Last Deact Code:    
Block Last Act Code:    Block Last Deact Code:    
Accept Last Act Code:    Accept Last Deact Code:    
CW Act Code:    CW Deact Code:    
CW Per Call Act Code:    CW Per Call Deact Code:    
Block CID Act Code:    Block CID Deact Code:    
Block CID Per Call Act Code:    Block CID Per Call Deact Code:    
Block ANC Act Code:    Block ANC Deact Code:    
DND Act Code:    DND Deact Code:    
CID Act Code:    CID Deact Code:    
CWCID Act Code:    CWCID Deact Code:    
Dist Ring Act Code:    Dist Ring Deact Code:    
Speed Dial Act Code:    Paging Code:    
Secure All Call Act Code:    Secure No Call Act Code:    
Secure One Call Act Code:    Secure One Call Deact Code:    
Conference Act Code:    Attn-Xfer Act Code:    
Modem Line Toggle Code:    FAX Line Toggle Code:    
Media Loopback Code:    
Referral Services Codes:    
Feature Dial Services Codes:    

Vertical Service Announcement Codes
Service Annc Base Number:    
Service Annc Extension Codes:    

Outbound Call Codec Selection Codes
Prefer G711u Code:    Force G711u Code:    
Prefer G711a Code:    Force G711a Code:    
Prefer G726r32 Code:    Force G726r32 Code:    
Prefer G729a Code:    Force G729a Code:    

Miscellaneous
FXS Port Impedance:    FXS Port Input Gain:    
FXS Port Output Gain:    DTMF Playback Level:    
DTMF Twist:    DTMF Playback Length:    
Detect ABCD:     Playback ABCD:    
Caller ID Method:    FXS Port Power Limit:    
Caller ID FSK Standard:    Feature Invocation Method:    

General
Line Enable:    

Streaming Audio Server (SAS)
SAS Enable:     SAS DLG Refresh Intvl:    
SAS Inbound RTP Sink:    

NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
NAT Keep Alive Msg:    NAT Keep Alive Dest:    

Network Settings
SIP ToS/DiffServ Value:    SIP CoS Value:    [0-7]
RTP ToS/DiffServ Value:    RTP CoS Value:    [0-7]
Network Jitter Level:    Jitter Buffer Adjustment:    

SIP Settings
SIP Transport:    SIP Port:    
SIP 100REL Enable:     EXT SIP Port:    
Auth Resync-Reboot:     SIP Proxy-Require:    
SIP Remote-Party-ID:     SIP GUID:    
SIP Debug Option:    RTP Log Intvl:    
Restrict Source IP:     Referor Bye Delay:    
Refer Target Bye Delay:    Referee Bye Delay:    
Refer-To Target Contact:     Sticky 183:    
Auth INVITE:     Reply 182 On Call Waiting:    
Use Anonymous With RPID:     Use Local Addr In FROM:    

Call Feature Settings
Blind Attn-Xfer Enable:     MOH Server:    
Xfer When Hangup Conf:     Conference Bridge URL:    
Conference Bridge Ports:    Enable IP Dialing:    
Emergency Number:    Mailbox ID:    
Feature Key Sync:    

Proxy and Registration
Proxy:    
Outbound Proxy:    
Use Outbound Proxy:     Use OB Proxy In Dialog:    
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
Use DNS SRV:     DNS SRV Auto Prefix:    
Proxy Fallback Intvl:    Proxy Redundancy Method:    
Mailbox Subscribe URL:    Mailbox Subscribe Expires:    

Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    Resident Online Number:    
SIP URI:    

Supplementary Service Subscription
Call Waiting Serv:     Block CID Serv:    
Block ANC Serv:     Dist Ring Serv:    
Cfwd All Serv:     Cfwd Busy Serv:    
Cfwd No Ans Serv:     Cfwd Sel Serv:    
Cfwd Last Serv:     Block Last Serv:    
Accept Last Serv:     DND Serv:    
CID Serv:     CWCID Serv:    
Call Return Serv:     Call Redial Serv:    
Call Back Serv:     Three Way Call Serv:    
Three Way Conf Serv:     Attn Transfer Serv:    
Unattn Transfer Serv:     MWI Serv:    
VMWI Serv:     Speed Dial Serv:    
Secure Call Serv:     Referral Serv:    
Feature Dial Serv:     Service Announcement Serv:    
Reuse CID Number As Name:     CONFCID Serv:    

Audio Configuration
Preferred Codec:    Second Preferred Codec:    
Third Preferred Codec:    Use Pref Codec Only:    
Use Remote Pref Codec:     Codec Negotiation:    
G729a Enable:     Silence Supp Enable:    
G726-32 Enable:     Silence Threshold:    
FAX V21 Detect Enable:     Echo Canc Enable:    
FAX CNG Detect Enable:     FAX Passthru Codec:    
FAX Codec Symmetric:     DTMF Process INFO:    
FAX Passthru Method:    DTMF Process AVT:    
FAX Process NSE:     DTMF Tx Method:    
FAX Disable ECAN:     DTMF Tx Mode:    
DTMF Tx Strict Hold Off Time:    FAX Enable T38:    
Hook Flash Tx Method:    FAX T38 Redundancy:    
FAX T38 ECM Enable:     FAX Tone Detect Mode:    
Symmetric RTP:     FAX T38 Return to Voice:    
Modem Line:     RTP to Proxy in Remote Hold:    

Dial Plan
Dial Plan:    

FXS Port Polarity Configuration
Idle Polarity:    Caller Conn Polarity:    
Callee Conn Polarity:    

Call Forward Settings
Cfwd All Dest:    Cfwd Busy Dest:    
Cfwd No Ans Dest:    Cfwd No Ans Delay:    

Selective Call Forward Settings
Cfwd Sel1 Caller:    Cfwd Sel1 Dest:    
Cfwd Sel2 Caller:    Cfwd Sel2 Dest:    
Cfwd Sel3 Caller:    Cfwd Sel3 Dest:    
Cfwd Sel4 Caller:    Cfwd Sel4 Dest:    
Cfwd Sel5 Caller:    Cfwd Sel5 Dest:    
Cfwd Sel6 Caller:    Cfwd Sel6 Dest:    
Cfwd Sel7 Caller:    Cfwd Sel7 Dest:    
Cfwd Sel8 Caller:    Cfwd Sel8 Dest:    
Cfwd Last Caller:    Cfwd Last Dest:    
Block Last Caller:    Accept Last Caller:    

Speed Dial Settings
Speed Dial 2:    Speed Dial 3:    
Speed Dial 4:    Speed Dial 5:    
Speed Dial 6:    Speed Dial 7:    
Speed Dial 8:    Speed Dial 9:    

Supplementary Service Settings
CW Setting:     Block CID Setting:    
Block ANC Setting:     DND Setting:    
CID Setting:     CWCID Setting:    
Dist Ring Setting:     Secure Call Setting:    
Message Waiting:     Accept Media Loopback Request:    
Media Loopback Mode:    Media Loopback Type:    
CONFCID Setting:    

Distinctive Ring Settings
Ring1 Caller:    Ring2 Caller:    
Ring3 Caller:    Ring4 Caller:    
Ring5 Caller:    Ring6 Caller:    
Ring7 Caller:    Ring8 Caller:    

Ring Settings
Default Ring:    Default CWT:    
Hold Reminder Ring:    Call Back Ring:    
Cfwd Ring Splash Len:    Cblk Ring Splash Len:    
VMWI Ring Policy:    VMWI Ring Splash Len:    
Ring On No New VM:    

General
Line Enable:    

Streaming Audio Server (SAS)
SAS Enable:     SAS DLG Refresh Intvl:    
SAS Inbound RTP Sink:    

NAT Settings
NAT Mapping Enable:     NAT Keep Alive Enable:    
NAT Keep Alive Msg:    NAT Keep Alive Dest:    

Network Settings
SIP ToS/DiffServ Value:    SIP CoS Value:    [0-7]
RTP ToS/DiffServ Value:    RTP CoS Value:    [0-7]
Network Jitter Level:    Jitter Buffer Adjustment:    

SIP Settings
SIP Transport:    SIP Port:    
SIP 100REL Enable:     EXT SIP Port:    
Auth Resync-Reboot:     SIP Proxy-Require:    
SIP Remote-Party-ID:     SIP GUID:    
SIP Debug Option:    RTP Log Intvl:    
Restrict Source IP:     Referor Bye Delay:    
Refer Target Bye Delay:    Referee Bye Delay:    
Refer-To Target Contact:     Sticky 183:    
Auth INVITE:     Reply 182 On Call Waiting:    
Use Anonymous With RPID:     Use Local Addr In FROM:    

Call Feature Settings
Blind Attn-Xfer Enable:     MOH Server:    
Xfer When Hangup Conf:     Conference Bridge URL:    
Conference Bridge Ports:    Enable IP Dialing:    
Emergency Number:    Mailbox ID:    
Feature Key Sync:    

Proxy and Registration
Proxy:    
Outbound Proxy:    
Use Outbound Proxy:     Use OB Proxy In Dialog:    
Register:     Make Call Without Reg:    
Register Expires:    Ans Call Without Reg:    
Use DNS SRV:     DNS SRV Auto Prefix:    
Proxy Fallback Intvl:    Proxy Redundancy Method:    
Mailbox Subscribe URL:    Mailbox Subscribe Expires:    

Subscriber Information
Display Name:    User ID:    
Password:    Use Auth ID:    
Auth ID:    Resident Online Number:    
SIP URI:    

Supplementary Service Subscription
Call Waiting Serv:     Block CID Serv:    
Block ANC Serv:     Dist Ring Serv:    
Cfwd All Serv:     Cfwd Busy Serv:    
Cfwd No Ans Serv:     Cfwd Sel Serv:    
Cfwd Last Serv:     Block Last Serv:    
Accept Last Serv:     DND Serv:    
CID Serv:     CWCID Serv:    
Call Return Serv:     Call Redial Serv:    
Call Back Serv:     Three Way Call Serv:    
Three Way Conf Serv:     Attn Transfer Serv:    
Unattn Transfer Serv:     MWI Serv:    
VMWI Serv:     Speed Dial Serv:    
Secure Call Serv:     Referral Serv:    
Feature Dial Serv:     Service Announcement Serv:    
Reuse CID Number As Name:     CONFCID Serv:    

Audio Configuration
Preferred Codec:    Second Preferred Codec:    
Third Preferred Codec:    Use Pref Codec Only:    
Use Remote Pref Codec:     Codec Negotiation:    
G729a Enable:     Silence Supp Enable:    
G726-32 Enable:     Silence Threshold:    
FAX V21 Detect Enable:     Echo Canc Enable:    
FAX CNG Detect Enable:     FAX Passthru Codec:    
FAX Codec Symmetric:     DTMF Process INFO:    
FAX Passthru Method:    DTMF Process AVT:    
FAX Process NSE:     DTMF Tx Method:    
FAX Disable ECAN:     DTMF Tx Mode:    
DTMF Tx Strict Hold Off Time:    FAX Enable T38:    
Hook Flash Tx Method:    FAX T38 Redundancy:    
FAX T38 ECM Enable:     FAX Tone Detect Mode:    
Symmetric RTP:     FAX T38 Return to Voice:    
Modem Line:     RTP to Proxy in Remote Hold:    

Dial Plan
Dial Plan:    

FXS Port Polarity Configuration
Idle Polarity:    Caller Conn Polarity:    
Callee Conn Polarity:    

Call Forward Settings
Cfwd All Dest:    Cfwd Busy Dest:    
Cfwd No Ans Dest:    Cfwd No Ans Delay:    

Selective Call Forward Settings
Cfwd Sel1 Caller:    Cfwd Sel1 Dest:    
Cfwd Sel2 Caller:    Cfwd Sel2 Dest:    
Cfwd Sel3 Caller:    Cfwd Sel3 Dest:    
Cfwd Sel4 Caller:    Cfwd Sel4 Dest:    
Cfwd Sel5 Caller:    Cfwd Sel5 Dest:    
Cfwd Sel6 Caller:    Cfwd Sel6 Dest:    
Cfwd Sel7 Caller:    Cfwd Sel7 Dest:    
Cfwd Sel8 Caller:    Cfwd Sel8 Dest:    
Cfwd Last Caller:    Cfwd Last Dest:    
Block Last Caller:    Accept Last Caller:    

Speed Dial Settings
Speed Dial 2:    Speed Dial 3:    
Speed Dial 4:    Speed Dial 5:    
Speed Dial 6:    Speed Dial 7:    
Speed Dial 8:    Speed Dial 9:    

Supplementary Service Settings
CW Setting:     Block CID Setting:    
Block ANC Setting:     DND Setting:    
CID Setting:     CWCID Setting:    
Dist Ring Setting:     Secure Call Setting:    
Message Waiting:     Accept Media Loopback Request:    
Media Loopback Mode:    Media Loopback Type:    
CONFCID Setting:    

Distinctive Ring Settings
Ring1 Caller:    Ring2 Caller:    
Ring3 Caller:    Ring4 Caller:    
Ring5 Caller:    Ring6 Caller:    
Ring7 Caller:    Ring8 Caller:    

Ring Settings
Default Ring:    Default CWT:    
Hold Reminder Ring:    Call Back Ring:    
Cfwd Ring Splash Len:    Cblk Ring Splash Len:    
VMWI Ring Policy:    VMWI Ring Splash Len:    
Ring On No New VM: